Color Control To The Image; The Suggestion To Process Image - Epson 1390 User Manual

Flatbed Inkjet Printer
A．Color Control to the image
Because the media is with different materials & Color, during application, we should has
reasonable adjust to the image。
1．When we have printing job to the transparent object, the image should be adjusted with
saturation at 15-30, and you can add the contrast at 30。
2．For the media with shallow color, we have to add 15-20 saturation。
3．For the media with deep color, we have to add 30-40 saturation & 15-30 contrast, and you have
to increase the value of curve in channel for red, green, blue, in this situation, the color would
be more important。
4．For media in color for deep Magenta & deep blue, we can just make it with black & white color
outputting。
5． We are not suggest you to print the media with deep color for such as (dark, brown), there might
not with good effect for outputting。
6．For something transparent, such as crystal, glass etc, the background should not be disarrayed
too much, and for the habiliment of the peoples, it should be more fresh。
B．The suggestion to process image
When you have printing job to the crystal & glass, under carefulness espial, there might have
lateral-cut on the surface, for better printing outputting, during printing, please have the image to be
rotary for 90 degrees, due to seeing habit, it might be better. Such as below:
For printing some media with special shape, you can built data base with image template, it
could be free applied in future printing job。
Have scan to the object as picture below（image one） ，gain the image by tool base on shape of
the printing object（image two） ，fill color on the picture be gained & edit no as picture three below。
When you have these job to be done, you can have free printing outputting for the same media
with same shape。
Note：
1．To the packing of the printing outputting, you should make it with fresh film, it will helpful for
avoiding to be polluted。
2．For something of the regular printing, please have strengthen liquid & coat processing before
printing, after printing, please packed the object with fresh film。
Output with direct print
２７
Output with image be rotary
２７