Introduction; The Empyre Elite Xt Hot Water Furnace; How The Empyre Elite Xt Works - Pro-Fab Industries Empyre Elite XT Installation And Operation Manual

Hot water heater
Table of Contents

Advertisement

InTroduCTIon

the Empyre Elite Xt Hot Water Furnace

You have selected one of the best wood stoves/furnaces
on the market today! It has been specially designed to
produce highly efficient heat with emissions well below
environmental standards, and we are proud to offer a 10
year limited warranty!
To ensure maximum benefit from your new Empyre Elite
XT furnace, read the Installation and Operation Instruction
Manual cover to cover and follow all instructions carefully.
The Empyre Elite XT furnace has been designed for outdoor
installation and has also been tested to meet UL Standard
391 - 2006/726-06 Standard C22.2 No.3 and CSA B366-
1-M91 for indoor central solid fuel fired furnaces, therefore
it may be installed indoors. It is ideally suited for both
domestic and commercial use.
MODEL Empyre Elite XT
Please keep this manual for future reference.

How the Empyre Elite Xt Works

The Empyre Elite XT uses a process called wood gasification
to produce highly efficient combustion in the furnace's
dual burn chambers. (1) Wood in the firebox burns from
4
the bottom, drying the top layer of wood in the firebox and
forcing gases and exhaust into the lower burn chamber. (2)
In the brick-lined lower chamber, these volatile gases are
burned at temperatures as high as 2000°F (1093°C).*
The fire brick lining in both burn chambers absorbs the heat
3
and maintains burn chamber temperatures for consistent
1
gas combustion. This high-temperature gas combustion
significantly lowers emissions, prevents creosote buildup,
and minimizes ash buildup in the unit. (3) After passing
through the burn chamber, exhaust air escapes through
multiple flues running through the water jacket, heating
2
the water quickly and efficiently. (4) The exhaust cools as it
passes through the flues, and when it leaves the chimney,
temperatures have fallen to 350°F (177°C).
*varies based on fuel type, burn rate and other conditions
Read more on gasification on page 17.
EmpyrE ElItE Xt InstallatIOn and OpEratIOn manual
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Empyre elite xt 100Empyre elite xt 200

Table of Contents