Miele K 9122 Ui User Manual page 45

If you have put locking pins into the
hinges to stop the door opening too far:
^ Remove the locking pins from the top
of the hinges.
^ Remove screws a, and use stoppers
supplied c to plug the empty holes.
Do not close up the hinges. Danger
of inury.
Changing the door hinging
^ Refit the hinges on the diagonally
opposite side of the door b.
Use a power screwdriver to secure
the hinges - screws a are
self-tapping.
^ Refit the door onto the pre-fitted
screws, and then tighten the screws.
^ Replace covers a, b and c.
^ Replace the locking pins into the top
of the hinges to prevent the door
opening too far.
45