Status - MSI Mega 180 User Manual

6.5 Status

In the Status tab, you can configure more network settings.
Signal Strength:
shows the received signal
strength level.
Link Quality:
shows the measured signal
level and connection status.
Channel
Specifies the operating radio frequency channel in Ad-hoc mode, which
should be set to the same channel as the other points in the wireless
network.
Speed
This field sets the current transmitting rate. The speed should be set to
Auto rate to optimize performance and range, which will adjust the
transfer speed for best performance and longest range automatically.
Radio
Set to On to activate the radio.
SSID
Means Service Set Identifier, a unique name shared among all points
in a wireless network. It must be identical for all points in the network.
Then the card will be able to connect to an access point with the
same SSID.
Click Advance, and you can get more information about the LAN traffic status
and more detailed settings.
Wireless LAN Card
6-15