Panasonic JS-170FR Series Service Manual page 90

(5)
Main Advanced Power
System Time:
System Date:
Legacy Diskette A:
Primary Master
Primary Slave
Secondary Master
Secondary Slave
Boot Options
Memory Cache
System Memory:
Extended Memory:
Help ↑ ↓
F1
Esc Exit ← → Select Menu Enter Select
(6) After selecting "Primary Master [****MB]", press the [ENTER] key to enter the "Primary Master" setup screen.
Main
Primary Master [****MB]
Type:
Cylinders:
Head
Sectors:
Maximum Capacity:
Multi-Sector Transfers: [16 Sections]
LBA Mode Control:
32 Bit I/O:
Transfer Mode:
Ultra DMA Mode:
Help ↑ ↓
F1 Select Item -/+
Esc Exit ← → Select Menu Enter Select
(7) Perform the following steps [1], [2], and [3], on the "Primary Master" setup screen.
[1] Select "Type: [Auto]" by using [↑] or [↓] key on the keyboard, then change the choice to "Type: [User]" by using [-] or
[+] key on the keyboard.
[2] Select "Transfer Mode: [FPI04/DMA2]" by using [↑] or [↓] key on the keyboard, then change the choice to "Transfer
Mode: [Fast FPI04]" by using [-] or [+] key on the keyboard.
[3] Select "Ultra DMA Mode: [Mode2]" by using [↑] or [↓] key on the keyboard, then change the choice to "Ultra DMA
Mode: [Disable]" by using [-] or [+] key on the keyboard.
PhoenixBIOS Setup Utility
Boot Exit
[xx:xx:xx]
[xx/xx/xxxx]
[1.44/1.25 MB
[****MB]
[None]
[None]
[None]
640 KB
*****
Select Item -/+ Change Values
PhoenixBIOS Setup Utility
[Auto]
[ ****]
[ **]
[**]
****MB
[Enable]
[Disable]
[FPI04/DMA2]
[Mode2]
Change Values
3-6
Item Specific Help
<Tab>, <Shift-Tab>, or
31/2"] <Enter> selects field.
F9
Sub-Menue F10 Save and Exit
Item Specific Help
F9 Setup Defaults
Sub-Menue F10 Save and Exit
Setup Defaults