♦ Display
• Crew display
Display unit
Resolution
Dot pitch
Display size
Contrast adjust
• Customer display
Display unit
Color
Number of digits
Interface
♦ Touch Panel
Type
Life
Interface
Size
♦ Local Area Network
Interface
Speed
Connector
Wake on LAN
♦ Magnetic Card Reader (Option:U24/U25 type )
Track
Swipe speed
Interface
Limitation
Life
♦ Buzzer
Buzzer volume is fixed.
♦ LED
Four status indicators on front panel.
2
1
TFT type LCD with Dual Back Light
800 x 600 (SVGA)
0.3 mm
12.1 type
Not needed
Fluorescent display tube
Green
20 characters (5 x 7dots, 9 x 6 mm) x 2 lines
Serial shared with COM3 (TTL level)
(It is possible to switch between Customer Display and External COM3 port by
software)
Resistive
Resistive over 10 million times by finger touch
(Simulates human finger, Shape of rubber end:R8, Hardness:60°, Load:200g,
Frequency:5 Hz)
Serial interface (using internal COM4, TTL level)
12.1 type
Ethernet (10BASE-T/100BASE-TX)
10M /100Mbps
8-pin Modular Jack (RJ-45)
Supported
ISO1/ISO2
10 - 120 (maximum) cm/s
Maximum swipe speed will be reduced when dual track reader is used.
Data is received as keyboard data
On MS-DOS, magnetic card reader doesn't work with USB keyboard.
Over 1 million swipe
LAN CARD
1
2
3
3
4
4
Power (Green : Running, Red : Stand-by)
Hard disk (Light on access)
LAN (Light on LAN activity)
Card Reader (Green : Good, Red : Error)
1-3