Connection With A Guitar - Korg A4 Guitar Owner's Manual

II
CONNECTION WITH A GUITAR
1. Connect a guitar to the INPUT jack on the A4's rear panel.
2. Connect your guitar amplifier(s) to the OUTPUT jack(s) on the A4's rear panel. (For best results, use both jacks for stereo output to two
amplifiers. For monaural (one amplifier) operation, connect to the UMONO jack only.)
3.
For volume pedal control, connect the optional KORG KVP-001 volume pedal. (See page
9
for more details.)
4. Input signals can be monitored in stereo by connecting a pair of stereo headphones to the PHONES jack.
5.
After completing connection with instruments and equipment, turn on the A4 Guitar's power.
6. When playing the guitar, the peak indicator, which moves in accord with the input volume level, will go from green to yellow to orange to red.
When increasing the input volume or playing the guitar strongly, please do not allow the indicator to go into the red area.
7.
Please set the output volume appropriately. Following the above will allow for performance conditions.
NOTE: When turning the A4 Guitar on and off, make sure to turn all volume controls on all instruments and equipment down as far as they will
go.
®
HDRiiAll
~~-
=
II
3