Table of Contents
Advertisement
4. INSTALLATION
i
When assembling the main body of the camera and its dome cover, make sure
they fit each other into place.
Note
The camera may fall off the ceiling even after the proper installation and
!
mounting. To prevent any accident, make sure the ceiling is firm and stable
enough to support the camera. If any reinforcement is needed, consult with
Caution
your safety personnel and proceed with the installation.
Connect the LAN cable, power supply
1)
cable, and the video loop out cable
with the camera.
Place the installation template on the
2)
ceiling.
Drill two holes on the template and
3)
insert anchor blocks into the holes.
Fasten the camera with screws.
Put the dome cover on the main
4)
body of the camera. Make sure the
main body and the cover fit each other
into place.
NM‐IP100
7
Advertisement
Table of Contents
