Power; Number Buttons; Button; Channel - JVC I' Art Pro AV-32DF74 User Manual

Power

Turns the TV on or off.
Press the P
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 7:
0 (Zero)
7 (Seven)

100+ Button

Use the 100+ button to directly access channels above channel 99. For example, to move to
channel 124, press 100+, 2 (Two), 4 (Four).
Channel +/–
Use these buttons to move up or down all the available channels your TV is able to receive.
Volume +/–
Use these buttons to raise or lower the TV's volume level.

Input

Selects the signal input source for the television: Input-1, 2, 3 or 4 for video devices like VCR's
DVD players, or camcorders.
I 1, 2, 3, 4
NPUT
Note:
• When you return to TV mode, press the R
• You can also access the FRONT CONTROL PANEL screen by using the M
the front of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT menu. Choose INPUT by pressing M
the front panel and choose input by using the C

Digital-In

Use this button to directly select the digital-in input.
Press the D

Light

Your remote control includes illuminated buttons for key features like
Volume +/–. Press the light button to turn the illumination on for 5 seconds.
button
OWER
-I button
IGITAL N
Button Functions
+/T button or direct 10 key pad.
ETURN V
+/- buttons (
HANNEL
button on
ENU
† on
ENU
√ ®
OPERATE ).
hannel +/– and
C
49