Power Cycling Your Set Top Box - Entone Digital TV User Manual

877-882-6386
10. IF the TV turns off, a working code has been found. Press OK once to
lock in the code. The selected mode key will blink twice,
11. To search for the codes of other devices, repeat the above but
substitute the AUX key for the auxiliary device you are searching for.
12. If all code sets of that device is exhausted in the search and the OK is
not pressed, the selected device key will fast blink 7 times and the search
mode will be terminated.

Power Cycling Your Set Top Box

If you are experiencing any of the following issues you may need to power
cycle your Set Top box:
turned off.
channels.
1. Unplug the Set Top box power cord from the wall outlet or from the
back of the box.
2. Wait 60 seconds and reconnect the Set Top box power cord into the
wall outlet.
3. The Set Top box will cycle through the entire start-up process and may
take up to 10 minutes.
4. When the Set Top box has completed, your TV will show Minerva
Loading and will come up with Channel 1, the Valley Community Channel.
Troubleshooting
61