Advertisement
Advertisement
Table of Contents
Related Manuals for Entone Amulet 505
Summary of Contents for Entone Amulet 505
- Page 1 Consolidated Communications USER’S MANUAL Amulet 505 Set-Top Box...
- Page 2 Welcome to Consolidated Communications (CCI) Thank you for choosing TV service from Consolidated Communications. With local, national and music channels, plus Premium High-Definition Channels, Video on Demand, Digital Video Recorder (DVR) and HBO, Showtime, Cinemax and Starz, our TV service provides you with leading-edge television technology.
-
Page 3: Let's Get Started
Let’s Get Started Get to know your Amulet 505 Set-Top Box Media Hub Your Amulet 505 Set-Top Box Media Hub supports all of CCI’s TV services including Pay Per View, Video on Demand and HD. This device must be handled much in the same way as a computer to reduce potential for damage. - Page 4 How to Connect the Set-Top Box to Your TV Basic Connections These are the required connections for your set-top box to operate properly. Connect the power supply via the Power Adaptor. Next connect an Ethernet cable (included) from your set-top box to a DSL modem or network router. TV Connections Choose one of the following connection configurations to connect your set-top box with your TV.
-
Page 5: System Configuration
System Configuration Front Panel Item Description Function Solid blue indicates the unit is on. Solid red indicates the unit is in standby mode. Flashing blue indicates the unit s booting up. Power Press button once to put unit in standby mode, press again to resume. -
Page 6: Back Panel
Item Description Function For connecting to an RF TV for loop-through. TV Out (For Amulet 505, it should NOT be connected to in-house cable network). Composite Video For connecting to a standard-definition TV (SDTV). Audio For connecting stereo audio output (Left/Right) Component Video For connecting to a high-definition TV (HDTV). -
Page 7: Troubleshooting
Troubleshooting Our friendly Technical Support staff is available 24 hours a day, 7 days a week. Simply dial 800.480.0080. TV Has A Snowy Screen • Check to make sure all cables are firmly connected. • Verify that the TV is set to the correct TV input mode. We prefer you use your original TV remote control. - Page 8 No Sound on TV • Verify that the TV does not have Mute on. • Check to make sure all cables are firmly connected. • If the TV still has no sound, power cycle the set-top box by disconnecting the power cord for 20-30 seconds, then reconnect and allow the system to fully load.
-
Page 9: Frequently Asked Questions
Frequently Asked Questions Questions about your Amulet 505 Set-Top Box Media Hub How do I start a recording from the on-screen guide? Go to the program, then press the RECORD button. Can I record a program while watching another program on a different channel? Yes. - Page 10 Technical Support: 800.480.0080 102-01448 Amulet 505 Guide_Aug2014_H...