Maintenance - Master-force 241-0854 Operator's Manual

WARNING:
personal injury, always disconnect the
plug from the power source when
cleaning or performing any maintenance.
Contact a qualified service technician for
ALL repairs.
WARNING:
when cleaning plastic parts. Most plastics
are susceptible to damage from various
types of commercial solvents and may be
damaged by their use. Use a clean cloth
to remove dirt, dust, oil, grease, etc.
WARNING:
damaged, it must be replaced by a
specially prepared cord available through
the service organization.
WARNING:
only identical replacement parts. Use of
any other parts may create a hazard or
cause product damage. To ensure safety
and reliability, all repairs should be
performed by a qualified service
technician.
Periodic maintenance of your Utila-Tool
allows for long
operation.
A cleaning, lubrication and maintenance
schedule should be maintained.
As a common-sense

maintenance

practice,
recommended steps:
1. Inspect the tool and accessories; check
them for wear or damage.
2. Keep the ventilation slots clean to
prevent overheating of the motor.
3. The tool maybe
effectively with compressed dry air.
Always wear safety goggles when
cleaning tools with compressed air.
MAINTENANCE
To avoid serious
Avoid using solvents
If the supply cord is
When servicing, use
life and trouble-free
and preventive
follow these
cleaned
4. Use a soft, clean, damp cloth to wipe
the tool housing. A mild detergent
can be used but nothing like alcohol,
petrol or other cleaning agent. Never
use caustic agents to clean plastic
parts.
most
Page 16