Setting V-Chip - JVC AV 24F702 User Manual

SETTING V-CHIP

(The V-CHIP function fitted this TV corresponds to the U.S. standard only.)
This TV is fitted with a V-CHIP controller which provides you with channel viewing access controls and restrictions. This
function is to prevent your children from watching violence or sexual scenes that may be harmful.
1
Press the MENU button and
press the CH + ( ) or – ( )
button to select the V-CHIP SET
option, then press the ENTER
button.
2
Enter your password (4 digits)
using the 10-key pad (0-9). In
the event of entering incorrect
password press the VOL – ( )
button. Then press the ENTER
button.
• After registration of password, step 3 will not
appear.
3
Enter the same password for
confirmation, then press the
ENTER button.
TV RATING
VOL – ( )
TV–Y TV-Y7
OFF
TV-Y : all children
TV-Y7 : 7 years old and above
TV-G : childrens program
When you select TV-Y7, TV-PG, TV-14 or TV-MA, press the DISPLAY
button to explain the rating.
Press the CH + ( ) or – ( ) button to select the desired rating you
want. Press the VOL + ( ) or – ( ) button to select the setting ON
or OFF. If you want to back to V-CHIP SET menu, press the MENU
button.
NOTES:
• If you want to change password, follow steps 1 and 2 and select "CHANGE PASSWORD" option then enter your
new password.
• The V-Chip function is activated only on programs and tapes that have the rating signal.
• Once you block a program using the V-Chip function, the blocked program cannot be watched based on the content
of the show. When the program starts, the "IF YOU CANCEL PROTECT, INPUT PASSWORD" will appear on the
screen. When you want to release the V-Chip temporarily, enter the password.
If you change the channel or turn off and on the TV while releasing the V-Chip temporarily, the V-Chip setting will be
resumed.
• When you watch the TV from the cable box or the VCR with the RF Modulator, then you release the V-Chip
temporarily, the V-Chip setting will not be resumed until you turn off the TV. The TV channel is not used in this case.
• When changing the channel with the cable box or the VCR, approximately 10 seconds will pass until the program
appears.
• When you dislocated or lost the password, you can cancel the existing password by the following procedure:
- Press VOLUME – button of main unit.
- Keep pressing VOLUME – button of main unit and press "0" key of remote control simultaneously for a few
seconds.
16
MENU
CLOCK SET
ON/OFF TIMER
CH SET-UP
PICTURE
AUDIO
LANGUAGE / IDIOMA / LANGUE
V-CHIP SET
/ / ENTER / MENU / EXIT
V-CHIP SET
NEW
PASSWORD
0-9/ / ENTER / MENU / EXIT
V-CHIP SET
CONFIRM
PASSWORD
0-9/ / ENTER / MENU / EXIT
VOL + ( )
TV-G TV-PG TV-14
TV-PG : parental guidance
: 14 years old and above
TV-14
: 17 years old and above
TV-MA
4
Press the CH + ( ) or – ( )
button to select the V-CHIP
option.
Press the VOL + ( ) or – ( )
button to select the ON.
5
Press the CH + ( ) or – ( )
button to select the TV RATING
or MOVIE RATING option.
:
6
Press the VOL + ( ) or – ( )
button to select the desired
rating for the applicable video
or TV channel.
:
7
Press the EXIT button.
MOVIE RATING
VOL – ( )
TV-MA
OFF G
G : all ages
PG : parental guidance
PG-13 : parental guidance
less than 13 years old
V-CHIP SET
V-CHIP
TV RATING
MOVIE RATING
CHANGE PASSWORD
/
V-CHIP SET
V-CHIP
TV RATING
MOVIE RATING
CHANGE PASSWORD
/
V-CHIP SET
V-CHIP
TV RATING
MOVIE RATING
CHANGE PASSWORD
DISPLAY TO SET CONTENTS
/
VOL + ( )
PG PG-13 R
R : under 17 years old
parental guidance
suggested
NC-17 : 17 years old and above
X : adult only
: OFF
: OFF
: OFF
/ / / MENU / EXIT
: ON
: OFF
: OFF
/ / / MENU / EXIT
: ON
: TV-14
: OFF
/ / / MENU / EXIT
NC-17 X