Setting Language; Setting Clock - JVC AV 24F702 User Manual

SETTING LANGUAGE

This TV can display the channel number, on-screen displays and picture adjustments on the screen in English, Spanish or
French.
On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially.
Select the language you prefer first, then proceed with the other menu options.
1
Press the MENU button.
2
Press the CH + ( ) or – ( )
button to select the LANGUAGE
mode, then press the ENTER
button.
NOTE:
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text
will not be affected by the language selection.

SETTING CLOCK

You must set the time manually for DISPLAY and ON/OFF TIMER.
1
Press the MENU button.
2
Press the CH + ( ) or CH –
( ) button until the indicator
next to "CLOCK SET" begins
to flash, then Press the
ENTER button.
3
Press the CH + ( ) or CH –
( ) button to set the hour,
then press the VOL + ( )
button.
3
MENU
CLOCK SET
ON/OFF TIMER
CH SET-UP
PICTURE
AUDIO
LANGUAGE / IDIOMA / LANGUE
V-CHIP SET
/ / ENTER / MENU / EXIT
4
MENU
CLOCK SET
ON/OFF TIMER
CH SET-UP
PICTURE
AUDIO
LANGUAGE / IDIOMA / LANGUE
V-CHIP SET
/ / ENTER / MENU / EXIT
CLOCK SET
12 : 00 AM
/ / / / ENTER / MENU/ EXIT
Press the CH + ( ) or – ( )
button until the " " indicator
points to the desired language:
English (ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press the
ENTER button.
Press the EXIT button.
4
Press the CH + ( ) or CH – ( ) button to set
the minute.
5
Press the EXIT button.
NOTES:
• After a power failure or disconnection of the
power plug, the time display will be lost. In this
case, set present time again.
• When you set the minute, you can change in 10-
minutes by holding down the CH + ( ) or CH –
( ) button.
LANGUAGE / IDIOMA / LANGUE
/ / ENTER / MENU / EXIT
CLOCK SET
10 : 00 AM
/ / / / ENTER / MENU/ EXIT
13