Information; Cleaning And Care; Descaling The Appliance - Beko BKK 3008 KM User Manual

4

Information

4.1 Cleaning and care

Caution
• Never use petrol, solvents, or abrasive cleaners,
or metal object and hard brushes to clean the
appliance.
• Never put the appliance or power cord in water
or any other liquid.
1. Turn the appliance off and disconnect it from the
wall socket.
2. Allow the appliance to cool down.
3. Open the water tank cover, remove the
permanent filter, and dispose the used coffee
grinds.
4. Remove the permanent filter holder
grasping it from the small handle on the top of
the filter.
5. Clean the permanent filter holder
under running water and using a small amount
of mild cleanser. The permanent filter
glass jug can be cleaned in the upper shelf of
J
the dishwasher or under running water.
6. Use a damp soft cloth and some mild cleanser to
clean the exterior of the appliance.
7. Insert the permanent filter holder
cleaning. Ensure to insert it properly into place,
otherwise the water tank cover cannot be closed.
8. Replace the permanent filter
Note
• Before using the appliance after cleaning, dry all
parts carefully using a soft towel.
Coffee Maker / User Manual
by by
I
by placing
I
and
H
after
I
and glass jug .
J
H

4.2 Descaling the appliance

Descaling extends the life of your appliance. Descale
your coffee machine at least 4 times per year. The
period depends on the water hardness of your area.
The harder the water is, the more often the appli-
ance has to be descaled.
1. Purchase a suitable descaler from a speciality
store. Please ask naming the device.
2. Prior to commencing the descaling process,
thoroughly read the manufacturers package
insert for the descaling solution. Should the
manufacturer's instructions differ from the ones
listed below, then follow the manufacturer's
instructions.
Note
• You can also use white vinegar and lemon juice
in place of descaling solution.
3. Fill the water tank to the MAX marking and add
descaling solution.
Mixing ratio: 4 parts water to 1 part descaler.
4. Turn the appliance ON and allow approximately
one large coffee cup full run through the
appliance.
5. Turn the appliance off.
6. Let the mixture soak for about 15 minutes.
7. Repeat steps 4 – 6.
8. Now turn the appliance on and let the entire
mixture run through.
9. Fill the water tank with cold, fresh drinking water
and run all the water through.
10. Repeat step 9 one time.
11. Now you may brew coffee again.
9 / 29 EN