Adding Or Changing A Channel Label; Checking The Digital Signal Strength - Sharp LC-50LB261U User Manual

Adding or changing a channel label

If a channel is not already labeled, you can label the
channel to make it easier to identify. You can also
relabel a channel that is already labeled.
1 Press MENU. The on-screen menu opens.
2 Press or to highlight CHANNELS, then press
or ENTER. The CHANNELS menu opens.
3 Press or to highlight Channel Edit, then press
ENTER. The CHANNELS · CHANNEL EDIT screen
opens with the channel number field highlighted.
4 Press or to select the channel you want to
label, then press
field.
5 Press or to select a character, then press
to move to the previous or next character
position. Repeat this step to enter additional
characters. You can enter as many as 11 characters.
6 When you have completed the label, press ENTER.
7 Press EXIT to close the menu.
to move to the channel label
www.sharpusa.com

Checking the digital signal strength

You can check the digital signal strength to determine
if you need to adjust your antenna or digital cable
input. The higher the signal strength, the less likely
you are to experience picture degradation.
1 Press MENU. The on-screen menu opens.
2 Press
or ENTER. The CHANNELS menu opens.
3 Press
press ENTER. The Signal Strength screen opens
showing the signal strength meter.
4 Press MENU to return to the previous menu, or
press EXIT to close the menu.
or
LC-50LB261U Sharp 50" LED TV
or to highlight CHANNELS, then press
or to highlight Signal Strength, then
57