Switching Back To The Connected Device; Using Cec Control; Turning Cec Control On Or Off - Sharp LC-50LB261U User Manual

Switching back to the connected device

1 Press INPUT, then press
HDMI 2 (MHL/ACC).
OR
Press MENU, then press
MHL/ACC.
2 Press ENTER to access your MHL-enabled device.
Your device's menu opens.
Note
Your device's menu will vary depending on
the device and the apps you have loaded
on the device.
3 Use and ENTER to navigate on your
device.
Note
The buttons you use to navigate on your
device may vary depending on the device.
or to select
or to highlight
www.sharpusa.com

Using CEC Control

CEC Control lets you control HDMI CEC-compatible
devices connected to the HDMI jacks on your TV using
the remote control that came with your TV. To use CEC
Control, you must set the CEC Control setting on the
SETUP · CEC menu to On.
Notes
• HDMI cables must be used to connect
HDMI CEC-compatible devices to your
TV.
• The connected device's HDMI CEC
feature must be turned on.
• If you connect an HDMI device that is
not HDMI CEC-compatible, all of the
CEC features do not work.
• Depending on the connected HDMI
device, the CEC feature may not work.

Turning CEC Control on or off

1 Press MENU. The on-screen menu opens.
2 Press or to highlight SETUP, then press
ENTER. The SETUP menu opens.
3 Press or to highlight CEC, then press ENTER.
The SETUP · CEC menu opens.
4 Press or to highlight CEC Control, then press
ENTER.
5 Press or to highlight On or Off, then press
ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
LC-50LB261U Sharp 50" LED TV
or
43