Safety Instructions; Work Area Safety; Electrical Safety - CEN-TECH 67979 Owner's Manual & Safety Instructions

Safety Instructions

IMPORTANT: Failure to understand and follow the instructions listed below
may result in electric shock, fire and/or serious personal injury.

Work Area Safety

1. Always perform automotive
testing in a safe environment.
2. Keep your work area clean and well
lit. Cluttered benches and dark
areas may cause accidents.
3. Keep clothing, hair, hands, tools,
test equipment, etc. away from
all moving or hot engine parts.
4. Operate the tool in a
well-ventilated work area.
5. Do not operate the tool in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or heavy dust.

Electrical Safety

1. To prevent electric shock, do not allow
product to contact live electrical parts.
2. Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges and refrigerators.
3. Do not expose the tool to rain or wet
conditions. Water entering the tool will
increase the risk of electric shock.
Page 2
For technical questions, please call 1-888-866-5797.
6. Keep a fire extinguisher suitable for
gasoline/chemical/electrical fires nearby.
7. Do not use the tool around corrosive
chemicals which can damage the tool.
8. Do not abuse the cable. Never
use the cable to carry the tool.
9. Keep bystanders, children and visitors
away while operating the tool.
10. Keep the tool dry, clean, free from
oil, water and grease. Use a mild
detergent on a clean cloth to clean the
outside of the tool when necessary.
4. Do not abuse the cord. Never use the
cord for carrying, pulling, or unplugging
the tool. Keep cord away from heat,
oil, sharp edges or moving parts.
5. If operating the tool in a damp location
is unavoidable, use aground fault circuit
interrupter (GFCI) to protect supply.
Item 67979