Advertisement
Model G-1 Guitar Amplifier Owner's Manual
produces more high-end sparkle. The Presence
control is very functional and powerful to the
overall tone and has more range than most
conventional amplifiers.
4 - FOOTSWITCH – Connection for the channel
selection footswitch, a standard TRS or Tip Ring
NOTE:
Sleeve cable is required.
The front panel
selector switch is disabled when the footswitch
is plugged into this jack.
A faulty footswitch or
flaky cable can cause the amp to default to the
OverDrive Channel!!!
FOOTSWITCH CONNECTION DETAILS
5 – SLAVE LEVEL - A tap off the output to send
an unbalanced signal to a power amplifier or
recording console. The slave level controls how
much signal is sent to the Slave Output jack.
The slave level can deliver signals above line
level.
NOTE: A proper load must be connected
to the amplifier (i.e. Speaker cab or load box)
or you will (possibly, pretty good chance) blow
the amp up ... which is no fun.
Page 8 of 14
Advertisement
