Installing The Charger - Guest 28003 Owner's Manual

2. INSTALLING THE CHARGER

Choosing Charging Location
The charger should have at least eight inches of unobstructed area on all sides of the
unit for effective cooling. The case of this charger will become warm during operation.
It is recommended that the charger be positioned in the standing position (handle up)
during normal operation. Do not operate the charger on carpeted, upholstered, or
varnished surfaces.
Making DC Connections
The output connector on the charger has been selected to accommodate 95% of newer
made wheelchairs and scooters available. The charger output therefore interlocks
directly with the mating connector located on the wheelchair or scooter. See diagram
below for connector polarization.
Battery Size Recommendations
The recommended maximum battery size per 3 amp bank is 36AH.
The recommended maximum battery size per 5 amp bank is 60AH.
The recommended maximum battery size per 8 amp bank is 96A
4
Note:
E+J Wheelchairs
require Guest P/N
2800-1 adapter.