Related Manuals for INVENTOR OMI-09
Summary of Contents for INVENTOR OMI-09
- Page 1 OMI-09/OMO-09 OMI-12/OMO-12 OMI-18/OMO-18 OMI-24/OMO-24 Wall Mounted Unit...
- Page 2 CONTENTS 3. Set the starting & stopping time 3.1 Push the TIMER ON button, the remote controller will show TIMER ON, the last set time for START operation and the Remote Controller Specification..........signal "h" will be shown on the DIGITAL display area. You Performance Features------------------------------------------------------- are now ready to readjust the TIMER ON to start the operation.
- Page 3 Remote Controller Specification TEMP Button : Push this button to decrease the indoor temperature setting. Model TEMP Button : Push this button to increase the indoor R51M/(C)E, R51M/BG(C)E, RG51M2/(C)E, temperature setting . RG51A/(C)E, RG51M3/(C)E, RG51M3/BG(C)E, RG51M8/(C)E,RG51M9/(C)E, RG51M/BGE-IN MODE Selection Button: Each time the button is pressed, the operation mode is shifted in the direction of the arrow: Rated Voltage 3.0V(Dry batteries Lr03 2)
- Page 4 TIMER OFF Button: Press this button to initiate the auto-off time ON/OFF Indicator: This symbol appears when the unit is turned sequence. Each press will increase the auto-timed setting in 30 on by the remote controller, and disappear when the unit is minutes increments.
-
Page 5: Automatic Operation
AUTOMATIC OPERATION DRY Operation 1. Push the MODE button to select DRY. 1. Use the MODE button to select AUTO. 2. Push the TEMP button to set the desired temperature from 2. Push the TEMP button to set the desired room temperature . 17 C to 30 C.
Need help?
Do you have a question about the OMI-09 and is the answer not in the manual?
Questions and answers