JVC KV-M65 Instructions Manual page 7

Introduction to the Roles of the System Components (continued)
KV-M65 display unit
POWER
Used to turn the power
source ON and OFF
Used to display the configuration screen for changing the input source and the various function menus.
When set to the TV mode, channel numbers are shown. Note, however, that television broad-
cast reception requires connection to the separately sold KV-C1 mobile TV tuner system.
Remote sensor
Used when the JVC mobile TV tuner
system KV-C1 is connected
STAND BY (R), ON (G)
When the power is off ... red
When the power is on ... green
Speaker
(on the back side)
MODE MENU
Used to display, select and determine the various adjustments
(screen, menu).
Dimmer sensor
This sensor automatically adjusts the screen brightness. (When
Auto Mode is set for the Dimmer Setting, the screen brightness is
automatically adjusted to one of 12 levels to suit the surrounding
brightness.)
KV-M65 KV-M65
MOBILE COLOR MONITOR SYSTEM MOBHE COLOR SYSTEM MOBHE COLOR SYSTEM
Screw holes are provided for attaching the monitor
stand (on the bottom side).
(1/4 inch unify screw, maximum length of 4.5 mm)
The numbers in the circles
indicate the page on which an
explanation is provided in this manual.
Normally:
Changing the channel setting in the
upward or downward direction
(only when connected to the KV-C1)
When setting various menus:
Menu selection
When setting various adjustment modes:
Adjustment and switching
7
( )
Terminal for connecting
the cable from the
controller unit (on the
right side)