Button Functions
Multi Screen Function
Your monitor has a type of screen: TWIN (2 inputs).
Note: After you press any multiscreen buttons, if you press the menu button, only the picture
adjust screen will appear.
Twin
Activate the split-screen option by pressing T
the remote control. The input you were watching
before pressing T
WIN
input will appear on the right. The sound will continue
to come from the main screen input. To turn split-
screen off and return to normal viewing, press T
again or press the B
Notes:
• If the signal that you are watching is coming from the HDMI input, you cannot enter the
SWAP mode.
• Main Screen and Split Screen will not display the same input at the same time.
• You can enter the TWIN mode when the screen is in NORMAL mode.
• Split-screen functions will not work with programs blocked by V-Chip ratings limits. A gray
screen will display instead.
• With split screen, the picture from the component terminal and DIGITAL-IN terminal will
not be displayed.
• The aspect of MAIN PICTURE becomes 16:9 when you input the picture of 480p, 720p
and 1080i from the component terminal and DIGITAL-IN terminal.
• After you press the S
OK button, select normal screen. If you don't operate, the MAIN SCREEN will be
automatically selected about 8 seconds later.
• Aspect does not work in Twin mode.
• When it is PC output, Main and Split screen will not be displayed.
• When you are in PC mode, TWIN or FREEZE can not be used.
• When you press the Menu button in Twin mode, it appears only as Picture Adjust menu.
52
will appear on the left, the new
button.
ACK
button, and select SPLIT SCREEN when you press the
ELECT
on
WIN
MAIN SCREEN
PICTURE
WIN
V-3
V-1
SPLIT SCREEN
PICTURE