Position Adjustment; Power Indicator - JVC HD-ILA HD-52G587 User Manual

Position Adjustment

Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama or cinema.
Press the M
To POSITION ADJUSTMENT
π †
è
To enter
To adjust the position
π †
Press the M
Notes:
• To reset the adjustment to the center, press the
O button.
K
• When the arrow disappears, while you are adjusting the position, the position is at its
maximum limit.
• If you select regular size and full size with aspect or Multi Screen, position adjustment option
is not seen.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when
the aspect is set Panorama Zoom or Cinema Zoom for 1080i and 720p signals, or when PC
mode is set.

Power Indicator

Power indicator allows you to adjust the brightness of the power indicator
Press the M
To POWER INDICATOR
π †
è
To adjust POWER INDICATOR LOW, HIGH
or OFF
Notes :
• When OFF is selected :
The LED disappears if you have a input signal.
The LED is lit as "LOW" when there is no input
signal.
• If you set a timer on the monitor, the power indicator will light even if the monitor is on stand
by.
button
ENU
button to finish
ENU
button
ENU
Onscreen Menus
OPERATE
PREVIOUS
NOISE MUTING
FRONT PANEL LOCK
V1 SMART INPUT
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
NEXT PAGE
SELECT
RESET
OK
INITIAL SETUP
OPERATE
MENU
EXIT
MENU
ON
OFF
ON
LOW
(2/4)
EXIT
43