Language
The language function is described on page 23 as the interactive plug-in menu. If you need to
choose the language again, follow the steps below.
Press the Menu button
To LANGUAGE
π †
è
To choose a language: ENG. (English),
FRAN. (French) or ESP. (Spanish)
Press the M
Closed Caption
Many programs now include an onscreen display of dialog called closed captions. Some
programs may also include displays of additional information in text form. Your monitor can
access and display this information using the closed caption feature. To activate the closed
caption feature, follow the steps below.
Analog Setting
Press the M
To CLOSED CAPTION
π †
è
To enter
To MODE
π †
è
To select CAPTION or TEXT in MODE
To CAPTION or TEXT
π †
è
To select a caption (CC1 to CC4) or text
channel (T1 to T4)
Press the O
Press the M
• To select the mode, press the C.C. button. See page 57.
Note:
You can not use the "Closed Caption" function under the following conditions:
1) When your device that you have connected can not send the "Closed Caption"
information to the monitor.
2) When the picture signals are component signals (except 480i), digital signals from the
HDMI 1 terminal, or PC signals.
button when finished
ENU
button
ENU
button to save
K
button when finished
ENU
Onscreen Menus
PREVIOUS
LANGUAGE
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
NEXT PAGE
SELECT
CLOSED CAPTION
MODE
CAPTION
TEXT
SELECT
INITIAL SETUP
ENG. FRAN. ESP.
OPERATE
PRESS
TO FINISH
OK
OPERATE
MENU
OFF
ON
(3/4)
EXIT
MENU
TEXT
CC1
T1
EXIT
39