Side Panel Adjustment - JVC GD-V502PCE Instructions Manual

Screensaver (For preventing after-images )

Side Panel Adjustment

Do not display a picture in 4:3 mode for an extended period,
as this can cause an after-image to remain on the side panels
either side of the display field.
To prevent the appearance of such an after-image, illuminate
the side panels.
This function may be applicable to the non-picture area.
1
To display the Screensaver screen.
(Refer to the previous page, operation guide steps 1 and 2)
2
3
R
Notes:
• Setting the side panel to High mode for an extended period may result in occurrence of after-images.
• The side panels may flash (alternate black/white) depending on the picture being shown on the screen. In such an
occurrence, use the Cinema mode.
26
Press to select the Side panel.
Press to select Off, Low, Mid, High.
Off Low Mid
Press to exit from Screensaver.
side panel
4:3
Screen Display
Non picture area
Picture out Picture
Screensaver
Start
Function
Mode
High
Start Time
Finish Time
Side panel
Wobbling
Peak limit
after-images
A B
Picture and Picture
10 : 00
PRESENT TIME
White bar scroll
Time Designation
0 : 00
0 : 00
High
Off
Off