Table of Contents
Advertisement
Basic Controls
Main Power On/Off Switch
Power Indicator
The Power Indicator will light.
•
Power-OFF... Indicator not illuminated
(The unit will still consume some power as
long as the power cord is still inserted into
the wall outlet.)
•
Stand-by
.... Red
•
Power-ON ..... Green
Press the "Status" button to display the current system status.
1 AV(S Video), Component/RGB, PC mode
2 Aspect mode (see page 18)
3 Off timer
The off timer indicator is displayed only when the off timer has
been set.
PICTURE POS./SIZE button
12
R - STANDBY
G POWER ON
INPUT button
(AV(S Video), Component/RGB and
PC Mode Selection)
Press the "INPUT" button to select AV
(S Video), Component/RGB and PC
input signal modes sequentially.
(see page 15)
Stand-by (ON/OFF) button
The Plasma Display must first be plugged into the wall outlet
and turnded on at the power switch (see page 14).
Press this button to turn the Plasma Display On, from Stanby mode.
Press it again to turn the Plasma Display Off to Stanby mode.
AV
1
4:3
2
Off timer
90
3
(see page 20)
–
INPUT
VOL
Status button
(see page 21, 22, 24, 25)
Press the "PC" mode selection button to select
the PC mode.
This button is used to switch directly to PC mode.
+
Volume Adjustment
Press the Volume Up "+"
or Down "–" button to
increase or decrease the
sound volume level.
N button
PICTURE button
(see page 24)
PC button
Advertisement
Table of Contents
