Adjusting Picture Pos./ Size - JVC GD-V422PCE Instructions Manual

Adjusting Picture Pos./ Size

Adjusting screen
1
PICTURE
POS. /SIZE
2
During "AV(S Video)" and
"Component" input signal.
Picture Pos./Size
Normalise
Normal
H-Pos
H-Size
V-Pos
V-Size
3
R
When the Position Left " " button is pressed.
H-Pos
When the Position Left " " button is pressed.
H-Size
When the Position Left " " button is pressed.
V-Pos
When the Position Left " " button is pressed.
V-Size
Flickering and distortion can be eliminated by using the Position Left " " or Right " " button
Clock Phase
(RGB/PC in Mode)
to carry out adjustment.
Note: Using the size adjustment function to display a picture with the aspect ratio changed from the original for the
purpose of the public display or commercial gain may infringe on copyright laws.
Helpful Hint (
While the Picture Pos./ Size display is active, if either the N button on the remote control is pressed at any time or the
(ACTION button) is pressed during "Normalise", then all adjustment values are returned to the factory settings.
Press to display the Picture Pos./ Size menu.
Press to select H-Pos / H-Size / V-Pos /
V-Size / Clock Phase.
During "RGB" and "PC"
input signal.
Picture Pos./Size
Normalise
Normal
H-Pos
H-Size
V-Pos
V-Size
Clock Phase
Press to adjust Pos./ Size.
Press to exit from adjust mode.
N
/
Normalise
INPUT
SURROUND
VOL
N R
PICTURE SOUND SET UP
MULTI
PIP SWAP SELECT MOVE
PICTURE
POS. /SIZE ASPECT
PC OFF TIMER
PLASMA DISPLAY
formats (Adjustments for component
signals are memorized for 525 (480) / 60i
· 60p, 625 (575) / 50i · 50p, 1125 (1080) /
60i · 50i · 24p· 24sF, 1250 (1080) / 50i,
750 (720) / 60p · 50p each, and RGB /
PC signals are memorized for each
frequency.)
(2) If a "Cue" or "Rew" signal from a VCR or
DVD player is received, the picture
position will shift up or down. This picture
position movement cannot be controlled
by the Picture Pos./ Size function.
When the Position Right " " button is pressed.
When the Position Right " " button is pressed.
When the Position Right " " button is pressed.
When the Position Right " " button is pressed.
Normalisation)
Notes:
(1) Adjustment details are
memorized separately for
different input signal
17