Adjusting The Screen Size And Position - JVC GD-V4210PCE Instructions Manual

To make an adjustment while viewing the adjustment
bar
After step 3 on page 16, proceed as follows:
1 Press 5/∞ to move the cursor (3) to "sub menu."
2 Press 3 to display the Sub Menu.
The Sub Menu for CONTRAST appears on the screen.
C O N T R A S T
–
3 Press 5/∞ to select the Sub Menu you want to adjust.
Each time you press the button, the Sub Menu changes as
follows:
CONTRAST
SHARPNESS
4 Press 2/3 to adjust the selected item.
5 Repeat steps 3 and 4 to adjust the other items.
6 Press MENU/EXIT (or MENU on the Monitor) three times
to exit from the menu operations.
To reset the adjustments
After step 3 on page 16, proceed as follows:
1 Press 5/∞ to move the cursor (3) to "reset."
2 Press 3.
The confirmation screen appears.
r e s e t
A r e y o u s u r e ?
" Y E S " t h e n p r e s s
" N O " t h e n p r e s s
3 Press 3 again to reset the adjustments.
To cancel the reset, press MENU/EXIT (or MENU on the
Monitor).
: + 0 1
+
BRIGHT CHROMA
PHASE
k e y .
M E N U k e y

Adjusting the Screen Size and Position

The screen size and position can be adjusted.
Adjusted settings can be stored for each signal type; therefore,
when the same signal comes in, the stored settings are
recalled.
• When adjusting the size, the size cannot be adjusted
proportionally, but can be enlarged rightward (or
downward) only and reduced leftward (or upward) only.
Therefore, it is necessary to adjust both the size and position
alternately to adjust to the appropriate size.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
Cursor (3)
P I C T U R E
S I Z E / P O S I T I O N
F U N C T I O N S E L E C T
S T A T U S D I S P L A Y
E N T E R :
2
Press 5/∞ to move the cursor (3) to
"SIZE/POSITION ADJ."
3
Press 3 to display the Size/Position
Adjustment Menu.
S I Z E / P O S I T I O N A D J .
H S I Z E
H P O S I T I O N
V S I Z E
V P O S I T I O N
C L O C K P H A S E
s u b m e n u
r e s e t
A D J U S T :
4
Press 5/∞ to move the cursor (3) to the
item you want to adjust.
Item
H (horizontal) SIZE
H POSITION
V (vertical) SIZE
V POSITION
CLOCK PHASE*
sub menu
reset
* CLOCK PHASE can be used, while RGB input is
selected, to reduce flickering and blurring on the
screen after adjusting the screen size.
(To be continued on the next page)
M A I N M E N U
A D J .
A D J .
S E L E C T : E X I T : M E N U
: + 0 1
: 0 0
: – 0 2
: 0 0
: 0 0
S E L E C T : E X I T :
M E N U
Adjustment range
–80 to +80
–80 to +80
–80 to +80
–80 to +80
–20 to +20
See "To make an adjustment
while viewing the adjustment
bar" on the next page.
See "To reset the adjustments" on
the next page.
17