Daily Operations / Connections; Front Panel - JVC DT-V20L1D Instructions Manual

Daily Operations / Connections

7 Front panel

DT-V24L1 and DT-V20L1 do not have
Tally lamp
This lamp is controlled by the tally function
of MAKE/TRIG. terminal (☞ "FUNCTION
SETTING" on page 12 and "External
Control" on page 14).
The illustration of the monitor is of DT-V24L1D.
1
Speakers (stereo)
The speakers emit the same audio signal output
from AUDIO ASSIGN (MONITOR OUT) terminals.
8
☞ " AUDIO ASSIGN (MONITOR OUT) terminals"
on page 8
2
VOLUME adjustment knob
Adjusts the speaker volume.
3
PHASE adjustment knob
Adjusts the picture hue.
4
CHROMA adjustment knob
Adjusts the picture color density.
5
BRIGHT adjustment knob
Adjusts the picture brightness.
u
, SDI 1 and SDI 2 buttons/lamps (
NOTE
"NO EFFECT" is displayed when you press a button which is not available for the current input or signal format (the lamp lights even when the function does not actually work).
6
CONTRAST adjustment knob
Adjusts the picture contrast.
7
MUTING button
Mutes the sound when a menu screen is not
displayed.
• To cancel the function, press the button again or
turn the VOLUME adjustment knob.
8
Menu select buttons ( ¥ ¥ ¥ )
When a menu screen is displayed
\ Selects or adjusts menu items.
☞ "Menu Operations" on page 7
When no menu screen is displayed
\ Selects the audio channels of EMBEDDED
AUDIO (DT-V24L1D and DT-V20L1D only).
☞ "Audio Channel Selection" on page 7
To display the set-up menu
\ Press
button while pressing button.
☞ "Menu Operations" on page 7
9
MENU button
Displays the main menu.
☞ "Menu Operations" on page 7
p
COLOR OFF button/lamp
Displays only the luminance signal.
q
1:1 button/lamp
Displays the picture in the original resolution of the
input signal.
NOTE
• This function does not work when the input video signal
has higher resolution than the resolution of the panel
(DT-V20L1D and DT-V20L1 only).
• The aspect ratio of the picture may change depending on
the input signal.
i
).
w
AREA MARKER button/lamp
Activates/deactivates the settings of "MARKER
SELECT," "ASPECT SELECT," "R-MARKER
SELECT" and "R-ASPECT SELECT" in "AREA
MARKER" (☞ page 10).
NOTE
• This function works when the picture is displayed in 16:9
aspect ratio.
• The functions do not work when "MARKER SELECT"
or "R-MARKER SELECT" is set to "OFF" in "AREA
MARKER."
e
SAFETY MARKER button/lamp
Activates/deactivates the settings of "ASPECT
SELECT," "R-ASPECT SELECT," "SAFETY
MARKER" and "R-SAFETY MARKER" in "AREA
MARKER" (☞ 10 page).
NOTE
• This function does not work when displaying the picture
in the 1:1 mode.
• The functions do not work when "SAFETY MARKER"
or "R-SAFETY MARKER" is set to "OFF" in "AREA
MARKER."
r
SCREENS CHECK button/lamp
Displays only the selected element (R, G, or B) of
the video signal.
• Each time you press this button, the screen
changes in the following order.
Normal screen Red screen
Blue screen Green screen
• The screen changes as above also when "SCR
CHECK" is controlled with MAKE/TRIGGER
system (☞ "External Control" on page 14).
t
ASPECT button/lamp
Changes the aspect ratio of the picture from 4:3 to
16:9.
• To return to 4:3, press the button again.
• Use this function when the picture of 16:9 aspect
ratio is squeezed into 4:3 format signal.
NOTE
This function does not work when displaying the picture in
the 1:1 mode.
y
I / P MODE button/lamp
Selects a proper mode corresponding to the input
picture.
• Each time you press the button, the mode
changes as follows.
• The mode changes as above also when
"I / P MODE" is controlled with MAKE/TRIGGER
system (☞ "External Control" on page 14).
NOTE
Memorized for each input.
u
T.C. (time code) button/lamp
Displays the time data (time code) contained in the
SDI signal.
i
INPUT SELECT buttons/lamps
Selects an input.
SDI 1 : HD/SD SDI (IN 1) terminal
SDI 2 : HD/SD SDI (IN 2) terminal
DVI : DVI-D (HDCP) terminal
COMPO. / RGB : COMPO. / RGB terminal
VIDEO 1 : VIDEO (INPUT 1) terminal
VIDEO 2 : VIDEO (INPUT 2) terminal
• The lamp for the selected input lights.
o
Power lamp
Unlit : The monitor is completely
off (the AC plug is not
connected).
Lights in Green : The monitor is on.
Lights in orange : The monitor is off (standby).
Flashes in orange : The monitor is in the suspend
mode.
;
Standby button
Turns on and off (standby) the monitor.
NOTE
To disconnect the mains line completely, unplug the AC
plug from the wall outlet.
6