Input Label; Auto Setting; Input-3 Setting - JVC 0909HHH-MW-MT2009 Instructions Manual

Input Label

Adds a source name specifying a device after the source name (" Input-1 " -
" Input-3 ").
(No label) / VCR / DVD / Blu-ray Disc / PVR / D-VHS / STB / SAT /
■
AMP / GAME / CAM / DISC / PC
4:3 Aspect Setting
Selects the aspect setting which is applied when " Aspect " (➔ page 28)
is set to " Auto ". The picture is displayed in the selected aspect when the
aspect is 4:3 or when the monitor cannot detect the aspect of a picture.
Regular : Displays the picture in " Regular ".
■
Panoramic : Displays the picture in " Panoramic ".
■

1080 Auto Setting

Selects the default aspect for 1080i/p signals.
Full : Expands the picture to the full display size.
■
Full Native : Displays the picture in the same magnification (100%
■
scan).

Input-3 Setting

Selects the signal type for the INPUT-3 terminal (D-sub 15 pin).
●
Use the supplied conversion cables and other cords according to the type of
connection. (➔ page 06)
PC : For PC signals
■
Component : For component signals
■
Composite : For composite signals
■
31