Page 1
If a defect is found, KING CANADA will either repair or replace the product. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list. performance...
GENERAL SAFETY INSTRUCTIONS SPECIFIC SAFETY FOR POWER TOOLS INSTRUCTIONS 1. KNOW YOUR TOOL Additional Rules for Safe Operation Read and understand the owners manual and labels affixed to the tool. Learn its application and limitations as well as its specific potential hazards. 1.
GETTING TO KNOW ASSEMBLY & OPERATION YOUR PLANER ADJUSTING DEPTH OF CUT WARNING!: If any parts are missing, do WARNING!: Do not use this product as a not operate your planer until missing parts component of others products. Also, do not The depth of cut can be adjusted easily by are replaced.
OPERATION & ADJUSTMENTS OPERATION & ADJUSTMENTS REMOVING OR INSTALLING PLANER PLANING OPERATION FIG. 4 BLADES To begin a planing operation, rest the front Warning! Make sure the power cord is end of the planer on your workpiece without unplugged before changing and/or adjusting the blades ever making contact.
Fig.9 illustrates examples of proper and needed, replace both at the same time. Only improper blade settings. use identical King Canada carbon brushes. 1) Correct setting- the edges of the blades To gain access to the front carbon brush cap are perfectly parallel to the rear base (A) Fig.12, remove the dust cover (A) Fig.11...