Changing The Door Hinging - Miele KFN 12823 SD edt Operating And Installation Instructions

Changing the door hinging

The appliance is supplied right-hand
hinged. If left-hand door hinging is
required, follow the instructions below.
To change the door hinging you will
need the following tools:
– a cross-slotted screwdriver,
– a flat-bladed screwdriver,
– a selection of Torx screwdrivers,
– a spanner.
Two people are needed for
changing the door hinging.
Removing the door handles:
^ Pull door handle a towards you. Side
section b slides back.
^ Pull side section b firmly back out of
the guides on the mounting plate.
^ Undo the 4 screws (Torx 15) in the
mounting plate, and remove the
handle.
^ Remove the cover caps from the
opposite side, and fit them into the
empty holes.
42