Eco Navigation; Eco Refresh - Mercury VesselView 4 User Manual

Section 5 - Screen Navigation
When all targets have been achieved, the contextual data area screen will change from instructions to displaying OPTIMIZED
with the current fuel economy value.

ECO Navigation

The contextual data area footer will display REFRESH, MINIMIZE, and X. Use the pages, arrow and enter buttons to navigate
these features.
• Minimize will hide ECO instructions and display ECO in the system tray. Minimize allows the user to display other
information in the contextual data area.
• Refresh will reset the ECO values and use new parameters for determining the RPM and trim target values.
• X will close ECO Mode, removing the RPM and trim targets from the persistent data area.
• The active area will have a white boarder.
a

ECO Refresh

Refresh allows you to recalculate the current values that ECO uses for the RPM and trim targets.
1. Use the arrow buttons to highlight the refresh feature and press enter.
2. Instructions appear in the contextual data area. Use the arrow button to highlight the refresh feature and press enter.
3. When the system has finished calculating new targets, the contextual data area will change to indicated the values have
been refreshed.
Page 34
c
b
52176
52174
a - Refresh
b - Minimize feature active
c - Exit
52177
90-8M0074776 MAY 2013
eng