Tenda 3G150B User Manual page 81

3G150B 150Mbps Portable 3G Wireless Router
5. Why can't I access Internet or send and receive emails
through my router?
This may happen to ADSL and Dynamic IP users. First, you need to
check whether the RJ-45 port, which serves as a WAN port, is
correctly connected; if there is no problem with the physical
connectivity, then, you need to modify the default MTU value
(1492). Please replace the default MTU value with the
recommended value of 1450 or 1400 in the "WAN Setting"
interface.
6. How can I access Internet using Dynamic IP access
mode?
In Setup Wizard of the Web-based utility interface, select "Dynamic
IP" connection type and click "Save" to activate it.
7. How do I share resources on my computer with users on
Internet through the device?
To let Internet users access internal servers on your LAN such as
e-mail server, Web, FTP, via the device, use the "Virtual Server"
feature. To do so, follows the steps below:
Step 1: Create your internal server, make sure the LAN users can
access these servers and you need to know related service ports,
for example, Web server's port is 80; FTP is 21; SMTP is 25 and
POP3 is 110.
Step 2: Click "Virtual Server" and select "Port Forwarding" on the
Router's web interface.
80