Configuring Wireless Connection - Tenda 3G150B User Manual

3G150B 150Mbps Portable 3G Wireless Router
(Consult your ISP if you are not clear about them.) or use the
device as a proxy DNS server.
After you finish all configurations, click "OK" to submit and click the
"OK" button for properties on Local Area Connection interface to
save them.

3.2 Configuring Wireless Connection

If you switch the device to Wireless Router mode, you can only
access the Router's web interface using a PC with an installed
wireless network adapter.
Step1. View wireless connections
Right click "Network" and left click "Change adapter settings" to
open network connection screen. And you can see the wireless
connection is shown "Not connected".
Step2. To configure the wireless network adapter's IP address,
right click wireless network connection on the above screen and
then refer to chapter 3.1-stetp 4 and 5 for further configurations.
Right click "Wireless Network Connection" and select "View
available wireless networks"
Step3. All detected wireless signals will be shown in the interface
18