Table of Contents
Advertisement
7.
PROGRAMMING
7.1
LEGENDA
1
3
5
7
ENTER key:
to enter menus
1
CURSOR keys: scrolling
2
increasing / decrea-
4
sing values
RESET key:
to exit menus
3
LIST OF PROGRAMMABLE
FUNCTIONS
1. CUMULATIVE TOTAL
2. PRODUCT NAME
3. WATER VOLUME
4. GRIND TIME
5. MILK TIME
2
6. PRE-BREWING
7. TAMPING
4
8. GROUNDS NUMBER
9. MILK CLEAN WARN. H
10. CLEAN WARNING
6
11. GROUP SETTING
12. GRINDER SETTING
8
13. COFFEE TEMPERAT.
14. STEAM TEMPERAT.
15. WATER FILTER L.
Fig. 28
This operation should be realized by
an Expert Technician ONLY.
Adjustement carried out by NON
Certified Technichians or other per-
sons, may invalidate the Warranty.
menus,
7.2
PROGRAMMING
For accessing the programming sites proceed
as follows:
NOTE: can be performed with machine on.
• Insert the key into the appropriate lock.
• Turn the control panel hatch key counter-
clockwise.
• Open the control panel hatch; the display
will read:
• Press the ENTER key, close the front panel,
the display will read:
• Once the ejection cycle is over, the unit will
enter resting phase position and the display
will show the first item on the programming
menu:
KEY FUNCTIONS
▲▼ : Scrolling function list
Programmable and/or decreasing /
increasing values.
ENTER : To enter menus/ submenus and con-
firming data.
RESET : Moving back to preceding level.
43
Hide quick links:
Advertisement
Chapters
Table of Contents
