Common Interface; Trouble Shooting - Open Sky DigiTECH 5000F User Manual

6. Common Interface (Option function)
16
5.6.2. Teletext
This is to get channel date through the stream.
Please press text. Key.
TEXT
5.6.3. Zoom Function
This is to see a part of the screen in detail.
Press F4 Key and choose a part of screen using
the Volume "UP/Down" and CH. "UP/Down" keys.
And press "OK" key. The part of the screen is
extened.
This receiver is equipped with two slots of

Common Interface.

When a common interface CAM is inserted inside
the PCMCIA slot, the receiver detects the type of
the CAM automatically and display in the menu.
6

. TROUBLE SHOOTING

There may be various reasons for the abnormal operation of the receiver.
Check the receiver according to the procedures shown below .
If you can't solve the problem even after referring this trouble shooting, please
contact the dealer. Don't open the receiver cover. It may cause a dangerous
situation.
Symptom Cause
The front panel doesn't The power cord is not
display any message plugged in
Wrong connection in the
Audio / Video output of the
receiver to TV.
Wrong connection of the
satellite antenna.
No or Bad signal message
No picture or sound.
appears.
Audio muting.
TV power off.
The receiver can't receive
the signal.
No picture.
Incorrect values of some
tuner parameters.
Result
Check that the power cable is
plugged in to the wall outlet.
Connect the Audio / Video
output of the receiver to TV
correctly.
Connect the antenna cable
correctly.
Check other device connected
between LNB and the receiver,
or adjust the antenna position.
press the MUTE button.
Turn TV on
Check the antenna cable,
replace the cable, or connect
the cable to the receiver tightly.
set the values of tuner
parameters correctly in the
Installation Menu.
17