Identify The Vehicle Audio System - Rosen DS-GM1010 GM Series Installation Manual

Identify the Vehicle Audio System

Is to CONFIRM the Vehicle Audio System before you proceed. The Rosen Nav Systems are
specifically designed to be CONFIGURED to work in appropriate vehicles.
This System can be Configured to work in
ALL Audio Platforms
Using the wrong Configuration will cause
various audio performance problems
See the Trouble Shooting at the end of this Install Guide for symptoms
SOME VEHICLES ARE NON-AMP
These are typically the very low-end vehicles and work trucks.
They will not have any BOSE logos on the vehicle
CONFIGURE THIS WAY
USE HARNESS: DP-GM1016
INSTALLER SETTING MENU: CENTER PT =
MOST VEHICLES ARE STD-AMP
These are typically the mid-range vehicles
. They may have any BOSE logos on the vehicle
CONFIGURE THIS WAY
USE HARNESS: DP-GM1012
INSTALLER SETTING MENU: CENTER PT =
FEW VEHICLES ARE CENTERPOINT
These are the high-end vehicles including all GMC
Yukon/Sierra Denalis.
They may have BOSE logos on the vehicle
CONFIGURE THIS WAY
USE HARNESS: DP-GM1012
INSTALLER SETTING MENU: CENTER PT =
STILL NOT SURE...???
Go To STEP 1b
Check the Vehicle RPO Codes
as shown on the next page
Rosen Entertainment Systems
Multi-Media Navigation System Installation Guide
Installation Guide GM Series
The first step you need to complete
OFF
OFF
ON
STEP
1a
Copyright 2010 All Rights Reserved
DP-GM1014 Rev A
Page 2