Pride Elite Trsveller Owner's Manual page 21

I I I . Y O U R T R A V E L S C O O T E R
TILLER CONSOLE FUSE
The fuse located under the battery pack protects the tiller console electronics. See figure 9. In the event
any component of the tiller console is not responding, check this fuse. See VIII. "Basic Troubleshooting"
for fuse replacement instructions.
OFF-BOARD BATTERY CHARGER
The off-board battery charger, when plugged into the charger power cord receptacle and a standard
electrical outlet, charges the Travel Scooter's batteries. See figure 10.
Figure 9. 3-amp Tiller Console Fuse
SECUREMENT POINTS
Always secure the Travel Scooter in a forward-facing position in the vehicle. Attach the four tie-down straps
to the designated securement points. See figures 11, 11A, and 12. Tighten the straps to sufficiently remove
all slack. Never attach tie-downs to adjustable, moving, or removable parts of the Travel Scooter such as
armrests, shrouds, and wheels. These items should be removed. Position the anchor points for the rear tie-
down straps directly behind the rear securement points on the Travel Scooter. The front tie-down straps should
anchor to floor points that are spaced wider than the Travel Scooter to provide increased lateral stability.
WARNING! Ensure Travel Scooters are properly secured to the motor vehicle during
transport. Scooters that are not properly secured can become a hazard to the user and to
other vehicle passengers in the event of a crash, sudden stopping, or swerving, as the
Travel Scooter could tip or slide out of place.
FRONT SECUREMENT POINTS
Figure 11. Front Securement Points
(3-wheel)
Elite Traveller
PLUGS INTO THE OFF-BOARD
CHARGER PORT
Figure 10. Off-board Battery Charger
FRONT SECUREMENT POINTS
Figure 11A. Front Securement Points
(4-wheel)
www.pridemobility.com
PLUGS INTO STANDARD ELECTRICAL OUTLET
REAR SECUREMENT POINTS
Figure 12. Rear Securement Points
21