Table of Contents
Advertisement
BASIC OPERATIONS
Turning on the power
1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
TAPE
To operate the tuner (FM or AM),
see pages 7 – 9.
To operate the tape,
see pages 10 – 12.
To operate the CD changer,
see pages 20 – 21.
To operate the external component,
see page 22.
Notes:
*
Without connecting the CD changer you cannot
select the CD changer as the source.
** To select the external component other than the
CD Changer, the "EXT IN" setting must be set to
LINE IN. (See page 18.)
6
1
3
"HELLO" appears on the
display.
FM1
FM2
AM
FM3
TAPE
CD
*
**
(or LINE IN )
200W
KS-FX480
Multi
Music
TAPE
Scan
2
3
Adjust the volume.
Volume level appears.
4
Adjust the sound as you want.
(See pages 13 – 15.)
To drop the volume in a moment
Press
briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
To turn off the power
Press and hold
on the display.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 16.
To increase the volume.
To decrease the volume.
Volume or audio
level (see page 18)
indicator
until "SEE YOU" appears
Advertisement
Table of Contents
