Table of Contents
Advertisement
OTHER MAIN FUNCTIONS
Setting the clock
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 17.)
2
Set the hour.
1 Select "CLOCK H (hour)" if not shown on
the display.
2 Adjust the hour.
1
3
Set the minute.
1 Select "CLOCK M (minute)."
2 Adjust the minute.
1
4
Finish the setting.
16
To check other information during play, press
DISP (display).
Each time you press the button, the other
information (either the clock or the source name)
will be shown on the lower part of the display for
a while.
• During tuner operation:
• During tape operation:
• During CD changer operation:
• During external component operation:
2
To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for 5
seconds, then the power turns off.
Changing the general settings
(PSM)
2
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
Basic Procedure
1
2
Band
Clock
Play mode (tape direction)
Disc number
Clock
Clock appears and disappears alternately.
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 17.)
Select the PSM item you want to
adjust. (See page 17.)
Clock
Advertisement
Table of Contents
