Returning The Seats To An Upright Position - GMC Envoy Owner's Manual

Envoy XL and Envoy XL Denali
The second row seat is a 65/35 split seat which may be
folded and tumbled. Use this feature for gaining
access to the third row seats.
To fold and tumble the second row seat(s), do the
following:
1. Push the head restraints fully down.
2. Fold the seatback flat on the seat by pulling up
on the front part of the lever. The lever is located
on the outboard side of the seat indicated with
a 1 on the handle cover and side of the seatback.
3. Release the rear set of seat hooks from the floor
pins by pulling up on the rear part of the lever
indicated with a 2 on the handle cover and the side
of the seatback. This enables the seat to be
tumbled forward.

Returning the Seats to an Upright Position

Do the following:
1. Guide the seat to the floor to engage the seat
hooks with the floor pins.
2. Try to raise the seat to check that it is locked down.
3. Pull the seatback up to return it to the upright
position.
Entry/Exit to/from the Third Row Seat
To enter the third row seat, you must fold and tumble
the second row seat following the instructions given
previously.
If you are exiting the third row with no assistance, do
the following.
1. Pull the handle on the center of the second row
seatback down to release and fold the seatback.
2. Reach around to the side of the second row seat
and pull the back of the seat lever up to tumble
the entire seat.
1-7