Others - Panasonic DMR-XW385 Operating Instructions Manual

Changing the unit's settings

Others

Others
Standby Settings
Remote Control
Clock
Setup
PIN Entry
System Update
System Information
DivX Registration
Initialize
Others
∫ Standby Settings
Others
Standby Settings
Standby Settings
Power Save in Standby
Automatic Standby
Automatic Standby after OTR
Automatic Standby after Copy
Power Save in Standby
On It will go into the Power Save in Standby
mode.
On Timer "Power Save in Standby" is activated
when the set time comes.
Off It is possible to start quickly from the
standby mode. (Quick Start mode)
≥This function cannot be enabled when the DLNA
function is enabled in "Home Network ( DLNA )
Settings" or "Server ( DLNA ) Settings". (
Automatic Standby
Set the time to automatically turn the unit off.
After the unit has finished operating, the unit will be
turned off once the set time has passed.
Automatic Standby after OTR
If "On" is selected, this unit is turned to standby mode
when this unit is not operated for approximately
5 minutes after completing One Touch Recording
( 23).
Automatic Standby after Copy
If "On" is selected, this unit is turned to standby mode
when this unit is not operated for approximately
5 minutes after completing copy (
76
VQT3F56
Enlgish
Enlgish
Enlgish
75)
41).
∫ Remote Control
Change the remote control code on the main unit and the
remote control if you place other Panasonic products close
together.
≥Use "DVD 1", the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the number button
([1] to [6]) for more than 5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
≥Operation is possible only with Panasonic remote controls
with "IR6" printed at the bottom when the remote control
code of this unit is set to "DVD 4", "DVD 5" or "DVD 6".
DVD
DVD
IR6
∫ Clock
If the time is not set correctly, use the settings listed in
the method below.
Clock
Automatic Region Selection Daylight Saving Time
On
NSW / ACT
Time Date
0 00 10 1
Please set the clock.
OK: access RETURN: leave
OK
RETURN
≥Automatic
This unit usually obtains time and date information from
digital broadcasts.
But, if the time is not set correctly, set it to "Off" and
perform "Manual Setting".
≥Region Selection
Select the region where you live to adjust the standard
time.
≥The time contained in the broadcast signal is UTC
(Universal time, coordinated).
≥Daylight Saving Time
Select time offset from the standard time for Summer
Time.
≥If there is a gap between displayed time and actual
time, set this function.
≥Manual Setting
1 Select "Off" of "Automatic", then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the settings.
IR6
IR6
Automatic
1 2010