Common Operations; Preparations; Hold Function - Panasonic DMR-XW385 Operating Instructions Manual

Common Operations


DRIVE
SELECT
1
4
7
DEL
STOP
STATUS
OPTION
REC
TEXT
CHAPTER

Preparations

Turning on this unit
1 Turn on the TV, then select the appropriate
AV input to suit the connections to this
unit.
2 Press [Í] on the remote control or [Í/I]
on this unit.
The Easy setting will start at the initial power on after
purchasing this unit. (
16
VQT3F56
TV
TV operation

area (
VOL
CH
AV
PAGE
2 3
abc def
CH
5 6
mno
ghi jkl
p 8 9
w
xyz
qrs tuv
PROG/CHECK
0 INPUT
SELECT
SKIP SLOW/SEARCH
PAUSE PLAY/x1.3
EXIT
PAUSE LIVE TV
OK
RETURN
R G Y B
REC MODE F Rec SETUP
STTL AUDIO DISPLAY
TIME SLIP MANUAL SKIP
-10s +60s
18)
Inserting or removing a media
Press [< OPEN/CLOSE] on
79)
the main unit to open the tray
and insert a disc.
SD card
USB memory
≥When indicator on this unit's display blinks, do not
turn off the unit or remove the media. Such action may
result in loss of the media's contents.
≥When inserting a media, ensure that it is facing the right
way up.
≥Wipe off the dust or fingerprints from the discs before
use. ( 3)
≥Return discs to their cases or cartridges after use; this
helps to protect the discs against scratches and dust.
≥When removing the SD card, press on the centre of the
card and pull it straight out.
≥If you connect a Panasonic product with a USB connection
cable, setup screen may be displayed on connected
equipment. For details, refer to the instructions for the
connected equipment.
∫ To select a drive
Press [DRIVE SELECT] to select the media drive that you
operate.
∫ Release disc protection
[RAM]
If the disc is protected when writing to the disc, release the
protection ( 64, Setting the protection).

HOLD function

The HOLD function deactivates all buttons on the unit and
remote control.
Press and hold [OK] and
[RETURN
simultaneously until
"X HOLD" appears on
the unit's display.
To cancel the HOLD function
Press and hold [OK] and [RETURN
"X HOLD" disappears.
]
] simultaneously until