Accessories For The 300 Series Mixers; Mc-701G Gooseneck Microphone; Pw-2Y Jpw-4Y Insertion Cable; Fader-Link Knobs - Tascam M-300 Series Operation & Maintenance Manual

ACCESSORIES FOR THE 300 SERIES MIXERS

MC-701G Gooseneck M icrophone
The MC-7 0 1 G is a moving-coil dynamic micro­
phone with a unidirectional pickup pattern.
Originally designed for use as a high-quality
talkback mic to be plugged into the T ASCAM
300 Series Mixers, the MC-70 1 G can also be
used as a general purpose panel-jack-plug-in
microphone.
PW-2Y /PW-4 Y Insertion Cable
The TASCAM PW-2Y/PW-4Y is a connecting
cable that al lows signal processing such as a
graphic equalizer to be inserted at specific points
of the signal path of the 300 Series Mixers. Its
tip-ring-sleeve plug connects to the I NSERT jack
while its "Y'ed" end accommodates connection
to the input and output terminals of the out­
board equipment being used. Available in two
lengths - 2 m (PW-2Y) and 4 m (PW-4Y).
MH-408 Headphone Amplifier
The M H-406 is a headphone d istribution ampli­
fier that can be used to feed four sets of studio
cue headphones and can be mou nted in a 19"
EIA rack.
TZ-23 Fader-Link Knobs
The TZ-23 is used to link pairs of faders to­
gether providing the easiest and most consistent
way to accomplish cross-fades. One set includes
six (6) knobs.
47