09 CONFIGURATION
SETTING THE DATE AND TIME
These settings must be re-entered if the battery has been
disconnected.
1
Press the SET UP button.
2
Select the "Date & Time" function and
press the dial to con rm.
3
Select the "Set date & time" function
and press the dial to con rm.
SET DATE & TIME
4
Set the parameters one by one using
the direction arrows and con rm by
means of the dial.
AP_3008_01_2010_anglais_cag_pdf_263 263
AP_3008_01_2010_anglais_cag_pdf_263 263
DATE & TIME
The SETUP function gives access to the following options: System language, Date & Time, Display
(Brightness, Colour, Map colour), Vehicle, Units, System.
5
Select the "Date format" function and
press the dial to con rm.
6
Con rm the format required using
the dial.
Select the "Time format" function and
press the dial to con rm.
Con rm the format required using the dial.
Pressing the SET UP button for more than 2 seconds gives access to:
DESCRIPTION OF THE UNIT
GPS COVERAGE
DEMO MODE
263
04/02/2010 14:32:25
04/02/2010 14:32:25