Garmin GPSmap 60 Using Manual page 6

U S U / N A S A G E O S P A T I A L E X T E N S I O N P R O G R A M
Application #2: Finding (navigating to) a Waypoint
Your GPS unit can act as a compass and navigate you back to a previously defined waypoint. To
find the waypoint, follow these steps:
1. Press the Find button on the left side of the GPS unit.
2. On the Find menu, select Waypoints using the cursor.
3. Use the cursor to select the beginning letter of the desired waypoint,
press ok, and then select the waypoint by selecting ok again.
4. Select the GOTO option to create a direct line of travel to the Way-
point.
Note: The direct line is only applicable when the "off road" option Is applied. To do this:
select setup: Routing: Guidance method menu, then select the off-road option. The other option,
"Follow Road" will take you along the roads to get to your destination. This is convenient for
when you're driving trying to get to a particular waypoint.
O n T a r g e t 2 0 0 5