ADB 5810 Box User Manual page 2

About Your UNIVERSAL REMOTE
TCC has chosen the Universal Remote Control opting for the friendly remote control solution, made
made according to the highest quality. Please read these enclosed instructions carefully before
putting your to use.
Batteries
Your Remote requires 2 new "AA/LR6" Alkaline batteries.
1. Push and slide the battery door downward and lift it up to remove it.
2. Match the batteries to the (+) and (–) marks inside the battery case, then insert the batteries.
3. Place the battery cover by sliding upward and allowing it to click back into position.
- It is recommended that you do not use rechargeable batteries.
- On the inside of the battery compartment door you will find a label on which to write your Set-Up
Codes for future reference.
The Keypad
Please refer to the picture of the UNIVERSAL Remote Control.
1. Device Keys:
The TV, DVD & STB keys select the home entertainment device you wish to control. For example, pressing the
TV key allows the remote to control the functions of your television. Pressing the DVD key allows the remote
to access either DVD or VCR devices.
2. LED:
During the use of your remote, the LED under the corresponding device key will light up red.
3. AV Key:
The AV key operates the same function it did on your original remote.
4. Menu Key:
The Menu key brings up the menu of the device that is selected.
5. Power Key:
The Power key powers whatever device is selected. Select TV, Power to turn your TV on and off.
6. Shift Key:
The Shift key is used to set-up your Remote Control and to access special functions.
7. Number Keys:
The Number keys (0-9) provide the functions just like your original remote, such as the direct access to
program/channel selection.
8. Guide or Action Key:
After pressing the STB device key, the Guide key brings up the on-screen TV Guide.
ADB Universal Remote
Instructions Manual
1