Table of Contents
Advertisement
Timer Programming
The Timer Programming menu allows you to choose programmes that you
want to remind watching or record to the USB HDD. At the correct time, the
TV will tune to the correct channel even if the TV is in Standby mode.
1. Select the forthcoming programme or channel with
press
OK
to access
2. Select
USB HDD Rec.
To check / change / cancel a timer programming event
●
Recording
LED will turn to orange in Standby mode if
●
To return to TV Guide
●
BACK/RETURN
If you select the current programme, a confirmation screen asking
●
whether you want to watch or record the programme appears. Select
Timer Programming
record from the time you finish the timer programming event setting.
is displayed on the TV Guide screen if Timer Programming is set
●
from TV Guide.
If a programme exists in both HD and SD broadcast, the
●
screen will be displayed. Select HD or SD broadcast with
press
OK
to set.
= Note =
For freesat and DVB mode
●
Timer Programming
●
received via the signal from the broadcaster or service provider.
No other channels can be selected while the recording of
●
Programming
is in progress.
When recording programmes to the USB HDD, be sure to format the USB
●
HDD and enable it to record in
Recording
/
Reminder
with
Timer Programming
with
/
and press
will be displayed if HD broadcast is set.
only works reliably if correct time information is
USB Device
USB HDD setup
- 52 -
/
/
/
and press
OK
to set
Editing timer programming
Timer Programming
OK
to set
USB HDD Rec.
Timer Options
Timer
Setup.
/
and
is set.
to
/
and
Hide quick links:
Advertisement
Table of Contents
